30w 12v/24v DC Dimmable LED Driver Compared to traditional lighting solutions, LED fixtures are far better in terms of light quality, cost-effectiveness, and durability. Plus, they can decrease your carbon footprint, enabling you to contribute to helping protect the environment! While some LED fittings are mains powered, meaning you don’t need any LED drivers to make them work, most have a low voltage that requires a power supply to keep them running. This LED driver is available in 12 or 24v DC . Aside from that, it’s leading-edge and trailing-edge dimmable , so you can pair it with a LED-compatible dimmer switch and stunning dimmable LED cabinet lights or LED tape. With this, you’ll be able to season your home with the right atmosphere! Mains Wirable LED Driver (Wirable Directly to Your Mains Circuit) This LED driver is mains wirable , meaning you can connect it directly to your mains circuit. If you choose to hardwire the driver to the mains circuit, you’ll be able to turn on/off your LED cabinet lights or strip lights through a regular wall light switch. However, if you’re looking for another option, you can add a plug at the end of the LED driver and plug it into the next available socket! If you decide to hardwire, you’ll need more technical skills as it’s more complicated. Still, you’ll have a cleaner and more refined result. Alternatively, if you choose to add a plug, although it’s DIY-friendly, the plug will most likely be visible, and you’ll need to have a nearby socket. Low Minimum Load! Only 20% The minimum load of this LED driver is only 20% (6w) , while its maximum capacity is 30w of power. To guarantee that the LED fittings you will connect to this driver will last through its expected average lifespan, you have to should overload the driver. Do not link anything above the recommended minimum and maximum wattage. Just maintain the required range, and you will have nothing to worry about! Besides that, this LED driver is equipped with various safety fe
