View the refurbished HP FlexFabric 20Gb 2-port 630M Adapter 700076-B21 701528-001 Quickspecs here
The HPE FlexFabric 630M is a 2-port 20GbE Mezzanine adapter, featuring the first generation of 20Gb Ethernet offering in a single chip solution on a mezzanine form factor that further reduces power requirements for 2 ports of 20Gb Ethernet. It is designed for use with HPE BladeSystem c-Class Gen8 and Gen9 blade server platforms’ type A and Type B mezzanine slots. It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect Flex-20 blade interconnect technology, allowing each 20GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized servers. The HPE FlexFabric 630M adapter, in conjunction with HPE Virtual Connect FlexFabric technology, helps to extend the benefits of virtualization beyond the server and into the rest of the infrastructure.
The HPE 630M supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunnel Offload (NVGRE, VxLAN), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV, Network Partitioning (NPAR), VMware NetQueue and Microsoft VMQ.
HPE ProLiant BL460c Gen9, HPE ProLiant BL460c Gen8, HPE ProLiant BL465c Gen8, HPE ProLiant BL660c Gen8
HPE Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem, HPE Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem with TAA, HPE Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem, HPE Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option, HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem, HPE Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option, HPE Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem, HPE Virtual Connect Flex-10 Ethernet Module Enterprise Edition for BLc7000 Option, HPE 6127XLG Ethernet Blade Switch, HPE 6127XLG Ethernet Blade Switch with TAA, HPE 6125XLG Ethernet Blade Switch, HPE 6125XLG Ethernet Blade Switch with TAA, HPE 6125G/XG Ethernet Blade Switch, HPE 6125G/XG Ethernet Blade Switch with TAA, HPE 6125G Ethernet Blade Switch, HPE 6125G Ethernet Blade Switch with TAA.
HPE FlexFabric 630M Adapter also supports 1Gb or 10Gb connections with the following modules: HPE 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem, HPE 1Gb Ethernet Pass-Thru Module for c-Class BladeSystem, HPE Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class.
Full hardware offload of iSCSI and FCoE storage protocol processing for highest performance converged Ethernet data and storage networks. Dual-port Flex-20 10GbE Type A adapter for HPE BladeSystem c-Class Gen8 and Gen9 blade servers, Industry-leading throughput and latency performance, The HPE 630M is a Type A mezzanine adapter (works in Type A and Type B mezzanine slots) Optimized for virtual server environments with support for HPE Flex-20 Technology, Network Partitioning (NPAR) and Single-Root I/O Virtualization (SR-IOV), User configurable bandwidth settings when combined with the 20Gb Flex-20 Virtual Connect module or NPAR. From 100Mb/s to20Gb/s on up to four "Physical Function" NICs per port, in increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e. 10 Gb. Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE), Improved small packet performance, Support for Tunnel Offload (NVGRE, VxLAN), Integrated PHY and MAC, Support for Preboot eXecution Environment (PXE).
The HPE 630M adapter delivers 40,000 Mbps full duplex Ethernet transfer rate per port (80 Gbps aggregate full duplex), providing the network performance needed to improve response times and alleviate bottlenecks that impact performance of next generation data centers. 20Gb Ethernet bandwidth is ideal for high performance computing, database clusters and virtualization.
Evolve 20Gb at your own speed! When paired with the HPE Virtual Connect FlexFabric 20Gb Ethernet Modules, take advantage of four Flex Nics, which are PCI Physical Function devices that are OS/ Hypervisor independent. In addition take advantage of new storage I/O functionality making it a full-Converged Network Adapter (CNA): Server ROM recognizes them as individual NICs, Speeds can be set per NIC from 100Mb to 20Gbs in 100Mb increments, Threefold increase in number of network connections per port, Up to four physical function NICs per port, Ideal for virtualized server environment, especially for dedicated bandwidth application like virtual machine migration from one physical server to another physical server.
The HPE 630M supports accelerated iSCSI or iS
