RGB Colour Changing Strip Light Do you like hosting parties, gatherings, or events? If that is the case, level up your space by adding this RGB colour-changing LED strip light ! In one LED strip, you will get access to millions of colours, which you can take advantage of when setting up the aesthetic and atmosphere of your get-togethers! Aside from that, this LED strip light is powered by LED technology, so it would not leave a massive dent in your electrical bill, even if it produces outstanding illumination. In fact, it only needs 15w per metre ! On top of that, it can last for 50, 000 hours which is ten times longer than an average lighting solution! 24v DC - Requires an LED Driver This is a 24v DC LED strip light, meaning you’ll need an LED driver to make it run. You cannot wire it directly to the mains circuit because it’s not like those mains-powered light fixtures. To know which LED driver to use with your strip lights, you have to multiply the total length of the strips you’re using by the wattage per metre of the strip. So, if your project needs ten metres of the strip and it’s fifteen watts per metre, multiply the two. Then look for an LED driver equal to or higher than the requirement of the strip light. Never use an LED driver with a lower capacity than what your strips need. Free Bespoke Cutting Service We offer a free bespoke cutting service when you purchase this LED strip light! Let us know the length that you need, and we’ll see to it that it’s delivered to you as you requested. Just note that this LED strip is cuttable every 100mm , so when you place your order, round off to the nearest 100mm. Besides the free cutting service, we’ll also solder a 1-metre cable at the end of the strips so you can immediately proceed to the installation when you get your order. No more measuring, cutting and soldering! If you need a longer cable or have a specific request for your strip lights, call us at 0333 443 2465, and we’ll gladly assist you. Different Control O
